Shockwave Update

IMPORTANT: Please visit this page on a desktop to download and update your shockwave


Shockwave-Geräte erhalten gelegentlich Software-Updates, die neue Funktionen hinzufügen und bestehende Funktionen über die Desktop-Anwendung verbessern. Der Updater bringt die neuesten Updates für Ruroc ATLAS 3.0 & ATLAS 2.0 Shockwave Geräte

Release notes:

  • • ATLAS 3.0 neueste Version 0.2.11
  • • ATLAS 2.0 neueste Version 0.2.03
  • • Adds support for rider-pillion intercom and music sharing
  • • Improvement of battery state monitoring
  • • Improvement of LED indications
  • • Updated voice prompts

ATLAS 3.0 button arrangement

How to update:

Please note: the application requires a Windows 7 (or later) PC Please download and run the application first before connecting your Shockwave
  • • Download and open the Shockwave application on your computer
  • • Follow the application instructions to update the device firmware
  • • Reset the device by briefly removing and re-inserting the USB cable

Rider-pillion comms:

When connecting two Shockwave units for Rider-Pillion Intercom for the first time, put the unit into Bluetooth pairing mode.

ATLAS 3.0 Shockwave

  • 1. Long hold the Intercom Button to enter Intercom pairing mode, you will hear an 'Intercom Pairing' message.
  • 2. The red and blue LED lights will begin to blink together as the Shockwave looks for another unit to connect to.
  • 3. Wiederhole die Schritte 1 und 2 am zweiten Shockwave-Gerät.
  • 4. You will hear the message 'Intercom Connected' to confirm connection, the red and blue LEDs will flash once periodically while the devices remain paired.

ATLAS 3.0 Intercom button

  • Single click - Toggle Intercom ON or OFF
  • Double click - Disconnect from peer Intercom device
  • Langes Halten - Interkom-Kopplung

ATLAS 2.0 Schockwave

  • 1. Press the Volume up and Volume down buttons together for 5 seconds will put the unit into pairing mode.
  • 2. Once in pairing mode, double-click the Power Button to enter Intercom pairing mode.
  • 3. Die roten und blauen LED-Leuchten beginnen gemeinsam zu blinken, während das Shockwave nach einem anderen Gerät sucht, mit dem er sich verbinden kann.
  • 4. Wiederhole die Schritte 1 - 3 am zweiten Shockwave-Gerät.
  • 5. Das rote LED blinkt einmal in regelmäßigen Abständen, solange die Geräte gekoppelt sind.


Why upgrade to this version?

The latest firmware releases bring fixes and improvements to the Shockwave device. This includes the new rider to pillion communication feature

Trouble opening the update application

To make the update as simple as possible - the new updater tool does not require installation and can be opened before the Shockwave is connected. In rare cases missing DLL files will cause 'MSvcruntime' message. The missing DDL files can be installed from Microsoft using the following link:

Other questions

If you have any questions or problems relating to Shockwave, please contact

Apple Mac users

The update application currently is only supported by Windows 7 (or later) PC's. Mac users will need to find a friend with a Windows 7 (or later) PC. Ruroc will be developing updated applications to improve the update process in the future

Es sieht so aus, als ob Sie aus .... sind